Pat's Custom Models: Airplane Plans

All of the models that appear here were designed by Pat Tritle. The
designs are hand drawn, and include all the necessary cutting
patterns so no lofting is required to build the models. Plans are
shipped rolled.
The Cosmic Wind spans 30" and is an all sheet balsa design for Direct
Drive Speed 400 or Brushless equivalent and 3 or 4 ch. R/C.

Price: $19.95
The Shoestring spans 30" and is an all sheet balsa design for Direct Drive
Speed 400 or Brushless equivalent and 3 or 4 ch. R/C.

Price: $19.95
Mr. Mulligan spans 45" and is set up for Geared S-400 or equivalent
brushless power and 3 ch. R/C but can be easily converted to 4 ch. R/C by
the builder.
A Vac-Formed plastic Cowl and Wheel Pants are available from
www.parkflyerplastics.com

Price: $24.95
The Ercoupe spans 60" and is set up for Geared S-400 or equivalent
brushless power and 4 ch. R/C.

Price: $24.95
The Fairchild 24R is a 43" span lightweight Park Flyer for Geared S-280 or
equivalent Brushless power and 3 ch. R/C.

Price: $15.95
The J-3/Pa-18 is a 43" span lightweight Park Flyer for Geared S-280 or
equivalent Brushless power and 3 ch. R/C.

Price: $15.95
The Skyhawk is a 50" span light weight Park Flyer for Geared S-280 or
equivalent Brushless power and 3 ch. R/C

Price: $16.95
The Stinson Voyager is a 47" span lightweight Park Flyer for Geared
S-280 or equivalent Brushless power and 3 ch. R/C.

Price: $15.95
The F6F Helcat is a 49" span for geared 05 or equivalent Brushless Power
and 3 or 4 ch. R/C. Patterns are provided for cutting the foam wing core.

Price: $19.95
The P-47 Thunderbolt is a 49" span for geared 05 or equivalent Brushless
Power and 3 or 4 ch. R/C. Patterns are provided for cutting the foam wing
core.

Price: $19.95
The F9F Panther is a 39" span for direct drive 05 or equivalent Brushless
Power and 3 or 4 ch. R/C, and the Tractor prop in the radome keeps the
power set-up simple. Patterns are provided to cut the foam wing core.

Price: $19.95
The 1914 Ingram Foster is a knock-off of the original Curtiss Headless
Pusher. Span is 56" (Including the Ailerons). Power is Geared S-400 or
Comparable Brushless power and 4 ch. R/C

Price: $25.95
The VG-400 is  the downsized 48" span version of theoriginal Verti-Go BTE.
Power is Geared S-400 or an equivalent Brushless motor and 3 ch. R/C The
VG-400 is an excellant R/C trainer for both building and flying.

Price: $19.95
The Verti-Go BTE is a 60" span 3 ch. R/C Trainer for both building and
flying.. Power is Geared 05 or equivalent Brushless motor.

Price: $24.95
The Voltz-Plane is a 4 ch. low wing, clip-wing version of the original
Verti-Go BTE and is a terrific Aileron Trainer for the novice builder and flyer.

Price: $24.95
The Fokker E-IV Eindecker is a 3 ch. Sport Scale model of the famous
WW-I Fighter.  Power is Geared S-400 or equivalent Brushless power.

Price: $19.95
Wing Washout Jig  was developed to help simplify the rigging process
while building from our plans and Short kits. The idea behind the Jig is to
hold the dihedral and washout rigid while setting up the struts on
Monoplanes and rigging on Biplanes. The Jig can be used to set the
washout on high wing and low wing models without struts as well.
The Jig is built from 1/4 plywood and spruce with the outer stanchions
adjustable to accommodate any dihedral angle, and can be used on both
straight and swept wing models.
The Washout Jig plans includes all the full size patterns needed to cut the
parts, and the assembly drawings to build the 4 stanchions.
Airplane and
Base are not included.

Price $12.95                              
   
Due to the wide variety of Postal Rates and package size limitations, outside
of U. S.
orders must be calculated per order based on the size and weight of
the package and the country of destination. Drop a line at

patscustommodels@aol.com
and we'll figure up the rates for your specific order.